Quality Certificates
Standex Electronics has stood for quality for over 50 years. Standex Electronics quality systems consistently meet or exceed the quality requirements of the quality certificates below. Many Standex Electronics products are RoHS compliant as required. Standex Electronics is also IMDS capable. No matter if you require good ISO9000 quality systems or higher level quality systems such as TS16949 (automotive) or AS9100 (military and aerospace) Standex Electronics will engineer your products to be the most cost effective possible for your application.
Quality Certificates List
| Certificate |
PDF |
| Standex Electronics, Cincinnati, Ohio, USA — TS16949 (Automotive) Certificate |
 |
| Standex Electronics, Cincinnati, Ohio, USA — ISO9001 and AS9100 (Military & Aerospace) Certificate |
|
| Standex Electronics, Agua Prieta, Sonora, Mexico — TS16949 (Automotive) Certificate |
|
| Standex Electronics, Agua Prieta, Sonora, Mexico — ISO Certificate |
|
| Standex Electronics, Ontario, Canada — AS9100 (Military & Aerospace) Certificate |
|
| Standex Electronics, Ontario, Canada — ISO 9001 Certificate |
|
| Standex Electronics, China — ISO9001 Certificate |
|
| Standex Electronics, China — TS16949 Certificate |
|
| Standex Electronics, UK — ISO9001 Certificate |
|
|
- 3-D Cad-Key & 3-D Solid Modeling Design
- Connector & Terminal Engineering
- Magnetic Component Engineering for Applications from Low-cost / High-volume, Custom Consumer Products though High-reliability Military, Space, and Aerospace
- Mechanical Engineering & Electronic Component Packaging
- Power Supply & Other Systems Engineering
- Sensor & Reed Switch Engineering
- Custom Molding
- Encapsulation Molding
- Injection Molding
- Insert Float Molding
- Insert Molding
- 52ga-8ga & Foil Magnetic Component Winding
- Complete, In-house Machine shop
- Fully Equipped Certified Test Labs
- Glass to Metal Sealing
- Hand, Semi-automatic and Fully Automatic Assembly
- Hi-volume, Progressive-Die Stamping
- Rapid Prototyping
- TS16949:2002, QS9000 and ISO Certified Plants
- Wind and Assemble all core shapes and types including Laminated, Class 2, Air, EE, EF, EFD, EP, ETD, Pot Core, PQ, RM, Toroid, Rod, UU and UI
- Wind to 12,000 Turns; to 20,000VA, 5000 Volts, 200 Amps
- Wire Prep and Wire Harness Assembly
- Custom Products & Value-added Solutions
- Responding to and Solving Customer's Problems
- UL, CSA, IEC, TUV & VDE Standards
- 2-D and 3-D CAD
- Automated equipment
- Coil winding
- Custom tooling
- Fully-integrated manufacturing
- Glass to metal sealing
- Hand, semi-automated and automated assembly
- Insert and custom molding
- Laser welding
- Machine shop
- Progressive stamping
- Rapid prototyping
- Solid modeling
- Value-added engineering
- Wire prep and wire harness assembly
- CMM / Optical Comparator
- Corona Testing
- Cross-Sectioning
- Geometric Tolerancing
- Hi-Temp Testing (Up to 260°C)
- Humidity Testing (-18°C to 93°C, 98% RH, cycle temp or steady state).
- Lead Pull Testing
- Mechanical Shock Drop Testing (½ sine 50g 11ms, ½ sine 1500g .5ms, or sawtooth 100g 6ms)
- Microscopic Inspection
- Polishing
- Salt Fog Testing
- Solderability Testing
- Thermal Cycle Testing (-68°C to 177°C)
- Thermal Shock Testing (-70°C to 200°C, LN2 boost assures less than a 5 minute air-temperature recovery time).
- Vibration Testing (Sine or Random profile, 1" pk-pk displacement, 0 to 80 g pk, 5 to 2000 HZ)
- X-Ray
- AS9100
- Environmental Test Lab
- ISO9000
- Mil PRF-27
- Mil-I-45208
- Mil-Std-2000
- Mil-Std-981
- Mil-T-21038
- NHB 5300.4(3A-2)
- QPL
- TS16949
- International Traffic in Arms Regulations (ITAR) Registered
|
